best breaks and pads to buy

whats the best break disc's and pads to replace the ones on my 02 freelander? they are squeeling i changed the pads the other week but they are still squeeling so the only think i thourght it could be is,
a: cheep pads
B: dojy disc's
would i be right in saying replaceing both of these should eliminate the problem?

depends wot yu use it fur - i reckon EBC Disks and EBC6000 green stuff pads are bloody good.

or just put some copper slip on the back of the pads

I replaced mine wiff standards from Paddocks [un the fronts squeeled like floppy moanin bout his v6] so i took orft rough bit on outer circumfrence using a bastid file [garages dunt do this on a 4x4 cos its a pain rotating the disc] anyhows copper slip on the anti squeel shims never on brake contact, and now as quite as slob is now. . . . .however if yer discs are well down [vernear or micrometer measure] then replace them un make sure its like fer like, ie/ vented or non vented [solids] er hope this snipitt helps earthlings

Chamfer off the leading edge on your pads and it should cure the problem. My old deepender was really bad so I ended up having to chamfer the trailing edge too.

Another vote from me for EBC Greenstuffs, at least my freebie stops when required now!

My freelander did the same squeeling, it is because they have a hard spot in the pads there is not alot you can do about it. i took mine in to the local 4 x 4 centre they cleaned the pads and disc up, they did not squeel for a while but then they started again.........

Our TD4's front brakes starting squeeling like a grass about a fortnight after I changed them for OEM pads. Turned out they weren't fitted right - they are not matched pairs and don't, as first glance would suggest, have mirrored chamfers.

The genuine parts and OEM parts are marked LO/LI and RI/RO to indicate which are left/right inboard/outboard.

Cheers

Blippie