Kano
Active Member
- Posts
- 238
- Location
- East Africa
I am installing a R380 gearbox on a TD27 Nissan engine, with an adapter that was poorly manufactured and is off-center by 0.7mm.
I need to position the locating dowels, and it's quite a task to get proper measurements from parts that have seen better days...
Does anyone have the PCD/BCD for the bellhousing bolts and locating dowels, on a 300TDi mated to a R380 in a 110?
Thanks!
Philip
I need to position the locating dowels, and it's quite a task to get proper measurements from parts that have seen better days...
Does anyone have the PCD/BCD for the bellhousing bolts and locating dowels, on a 300TDi mated to a R380 in a 110?
Thanks!
Philip
Last edited: