4wdrev
New Member
- Posts
- 33
- Location
- NE Scotland
just done a tdi conversion to my 90 4c, but i have go a bad vibration when driving, its not the exhaust, and engine mounts are new and tight.
any ideas??
any ideas??
myn was the uj joints when i replaced myn with a 200tdi
"my vibration was caused by the universal joints when i replaced my previous engine with a 200tdi"What??????????
"my vibration was caused by the universal joints when i replaced my previous engine with a 200tdi"
Have you checked that your idle speed is correct (not too low) , also try freeing off all mountings and then retightening , incase they have been prestressed thereby taking some of the isolation out .
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!