1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Aux belt diagram

Discussion in 'Series Land Rovers' started by cgough, Jan 19, 2014.

  1. cgough

    cgough New Member

    Joined:
    Jan 19, 2014
    Posts:
    1
    Likes Received:
    0
    Hi

    HELP Please !
    Just joined Landy Zone

    I have a Series 1 2 Ltr Diesel Freelander and have just purchased a new Auxilary belt. I took the old one off , checked that the new one is the same size but can't for the life of me get the new one to fit !
    I didn't note how the old one was routed and have tried every purmutation.
    The obvious route leaves the belt to short and even with the testioner pulled fully back the belt is still at least 30mm short.
    Has any one out there had this problem or have a diagram that might help.
    I have Haynes manual but the diagram is no good as mine has A/C.

    Cheers

    Clive
     
  2. dogsbody

    dogsbody Very senior member

    Joined:
    Apr 5, 2010
    Posts:
    10,670
    Likes Received:
    8
    Location:
    Bristol
    I think that anybody can work out that you're a noobie - you're in the wrong section X 2.
    An introduction in the relevant place might be a polite start.
    Then - ask your question in the Freelander section, this bit is for Series Landies.
     
  3. ben waine

    ben waine Active Member

    Joined:
    Jun 5, 2011
    Posts:
    588
    Likes Received:
    0
    Location:
    close to stoke
    I 2nd what dogs body said !