automatic gearbox cooler lines

Whilst rebuilding my gearbox cooler lines, I lost some fluid during the process.

Once I completed the rebuild I loosened the gearbox fill plug to top up an was promptly coved in fluid.

Thinking maybe it was becauwe it hadnt been run for a while I started the car and cycked it through the gears and rolled it forwards and backwards. Gearbox still cold I popped the top up plug again and was ****ed on again.

Sooo, any ideas what im doing wrong. Or am I best just dropping all fluid out and starting again.

Throughout process, gearbox was cold and car had levelled itself in the highest suspension height.

Fluid level is checked with the engine cold and idling after cycling through the gears and back to P.

Thats what I did. An it still ****ed out.

Fluid was cold as was the engine.

langley said:

Thats what I did. An it still ****ed out.

Fluid was cold as was the engine.

Click to expand...

But was the engine idling?

Yip was the second time

langley said:

Yip was the second time

Click to expand...

Then the box has been overfilled.

Bgger bugger bugger..