Auto td4 freelander won't stay on once started

SteveVickers · Apr 12, 2017

Another job for the weekend

Came to go to work tonight and my freelander would turn over but wouldn't stay running it would just die.

Been running fine until today

Any ideas would be greatly appreciated

Rimini-Scott · Apr 12, 2017

Crank sensor ?

SteveVickers · Apr 12, 2017

Rimini-Scott said:
Crank sensor ?

Any more info. Where can I find it does it need changing??

Nodge68 · Apr 12, 2017

Can you hear the fuel pump running? It should run for about 30 seconds after the ignition is switched on.

SteveVickers · Apr 12, 2017

Nodge68 said:
Can you hear the fuel pump running? It should run for about 30 seconds after the ignition is switched on.

Where's the best place to listen for it

Nodge68 · Apr 13, 2017

SteveVickers said:
Where's the best place to listen for it

It depends on the year of it. If it's after 2003 there's 1 pump under the driver's side rear arch/ sill. Pre 2003 use a tank mounted pump and an extra engine bay mounted pump. Operation of both types of pump installation are the same. You should be getting 30 seconds of running after ignition switch on. Listen at the rear RH wheel to confirm this.

Alibro · Apr 13, 2017

Nodge68 said:
It depends on the year of it. If it's after 2003 there's 1 pump under the driver's side rear arch/ sill. Pre 2003 use a tank mounted pump and an extra engine bay mounted pump. Operation of both types of pump installation are the same. You should be getting 30 seconds of running after ignition switch on. Listen at the rear RH wheel to confirm this.

I had two 02 cars with the pump in each location so the change must have happened some time in 02.

Auto td4 freelander won't stay on once started

SteveVickers

Member

Rimini-Scott

Active Member

SteveVickers

Member

Nodge68

Well-Known Member

SteveVickers

Member

Nodge68

Well-Known Member

Alibro

Well-Known Member

Similar threads