auto gearbox ecu location?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

zen

Well-Known Member
Events Planner
Posts
2,602
Location
london
i need the autobox ecu loom from 1996 v8 gems..

looking at photos its not on the autobox loom (no plug for ecu shown)..so to try and find right loom on ebay , where is ecu located and what loom does it plug into?...ie passengers seat loom etc..

needed as retro fitting hp24 into classic..have ecu but need loom if only for the ecu plug and tail..

thanks
 
AWR3905 doesn't appear on MicroCAT

True but AMR3905 is listed at Rimmers as a wiring assembly. It does not however state what it is for. But that is not on Microcat either. I take it he will be using an early ECU, there are lots of gearbox looms to choose from on Microcat, it could be a nightmare finding one to suit. :)
 
True but AMR3905 is listed at Rimmers as a wiring assembly. It does not however state what it is for. But that is not on Microcat either. I take it he will be using an early ECU, there are lots of gearbox looms to choose from on Microcat, it could be a nightmare finding one to suit. :)
True....

I was going to list them all with there various VIN number boundaries...but there was a lot, and also two different sets for the Petrol Versions that overlapped VIN's and it wasn't 100% if there were different ones for 4.0 and the 4.6 so I kinda had a brain meltdown....

Best for Zen to take a gander and see if he can spot the right one.... http://lrparts.ru/engl
 
True....

I was going to list them all with there various VIN number boundaries...but there was a lot, and also two different sets for the Petrol Versions that overlapped VIN's and it wasn't 100% if there were different ones for 4.0 and the 4.6 so I kinda had a brain meltdown....

Best for Zen to take a gander and see if he can spot the right one.... Microcat - Spare parts Land Rover catalogue in English

4.0 and 4.6 are same with two different set ups to choose from. Diesel is different. Later canbus ECUs (adaptive values) as fitted to MY 99 and on petrol engined cars would not be suitable i would think.
 
Back
Top