Auto Box Oil Cooler Pipes

Greg_99 · Feb 6, 2011

Trying to remove my split oil cooler this morning and it seems the unions are jammed solid, so best option is to replace the cooler and metal pipe in and out pipes for new.

Question is i can see the flexi pipe goes into the metal pipe which feeds up in to the cooler. Question is how is best to seperate the flexi pipe from the metal ones as they seem to be a push fit of some sort?

mastiff · Feb 6, 2011

Don't know whether this will answer your question but check out www.discovery2.co.uk
Got a section on replacing these pipes.

Hope it helps.

cheers

Rob

Greg_99 · Feb 6, 2011

mastiff said:
Don't know whether this will answer your question but check out www.discovery2.co.uk
Got a section on replacing these pipes.

Hope it helps.

cheers

Rob

Thanks Rob seems mine is a different design of cooler and pipe fixings to this (1996 300TDI)

Just to clarify its the pipes from the cooler to the flexipipe which needs replacing.

Richard Martin · Feb 6, 2011

Greg,
I think you'll find that the pipes come as complete units from the autobox to the cooler, you can't separate the flexi bit and the metal bit

Greg_99 · Feb 6, 2011

From further research you seem to be right they come in complete units

For anyone that's interested the part numbers are Esr3239 and esr3240

Auto Box Oil Cooler Pipes

Greg_99

New Member

mastiff

Active Member

Greg_99

New Member

Richard Martin

Well-Known Member

Greg_99

New Member

Similar threads