landyandy675
Member
- Posts
- 17
- Location
- Oundle, Northants.
Hi, has anyone fitted a Ashcroft transfer kit on there series and how fiddley is it to do and are the results any good...
Ashcroft..
- Thread starter landyandy675
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
not difficult to reassemble the kit in modded transfer case
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,266
- Location
- Gloucestercotshirewolds
If you go for just the kit the machining needs to be accurate so unless you have the means (or know someone who has) go for the exchange casing so it's just a bolt on job.
Haven't heard anything about any issues with them in use apart from the usual ''Ive got an Ashcroft transfer box, Rangie diffs and 37'' tyres......why wont my Landy go up hills?''
Reportedly much stronger than an overdrive (but without intermediate gears, obviously)
Haven't heard anything about any issues with them in use apart from the usual ''Ive got an Ashcroft transfer box, Rangie diffs and 37'' tyres......why wont my Landy go up hills?''
Reportedly much stronger than an overdrive (but without intermediate gears, obviously)
ciderman
Active Member
- Posts
- 768
- Location
- sunny worcestershire
Very good- I have 2 such equipped vehicles, and one with od. only occasional problem is moving off up hill when towing . have to use low ratio. But the vehicles are just fine otherwise and easier to drive.
