Are the revs counted from alternator or crank position sensor? '98 2ldi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
OldIrishWulf

OldIrishWulf

Well-Known Member
Posts
3,974
Location
Great green Hibernia .
Before I start into removing the exhaust manifold,to have a look at the cps,I would like to be sure that the revs are counted there.Got to let it cool for another 1/2 hour or so.
Sorry for starting a new thread for something I've already asked.
 
Thanx again for that useful advice beasty.I think I can answer my own question.

I changed the cps and now the rev counter is working fine.Not sure if I read it somewhere,doubt if it was just a hunch.So the revs are counted by the crankshaft position sensor in my lseries.
 
i dont see how a bit of oil would stop the cps working , its an induction device ( not photo sensor)
ummmm maybe a bad connection ?
 
I'M not rure it was the oil or the crack in the wire where it loins into the sensor.I think it just cut out the rev counter as soon as it got hot.Red light came on in the same place on each journey ,10miles in,light came on-reves died.I'm sure I saw a pic of one on lseries or e-bay.
 
You must log in or register to reply here.

Similar threads

xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
463
xDParis64
xDParis64
spacebrodie
Freelander 2 (LR2) Cut out - P0045-19
Replies
6
Views
829
Arctic2
Arctic2
J Stokesy
Freelander 1 TD4 Camshaft Position Sensor Fault Code
Replies
5
Views
2K
Alteredtech
Alteredtech
xDParis64
Hello Again! (SOLVED, Engine replacement)
2 3
Replies
56
Views
4K
xDParis64
xDParis64
B
Crank position sensor
Replies
6
Views
1K
Nodge68
Nodge68
Back
Top