Are the cabin harness's specific or generic?

Hi,
I have a 2005 facelift and I want to add a few things that are not currently on the car such as fog lights & retractable wing mirrors. I know ill need some final bits of the harness but I'm wondering weather the cabin harness is generic, in that all the wiring is there and I will only need the final fit such as switches & the wing mirrors to complete the job?.

Fog light wiring is there. You'll need the switch and 2 relays for the fuse box. Otherwise it's just the fog lamps themselves and cut the bumper to fit them in. Don't forget you need trim rings to finish the job off

Power fold wiring should also be there as far as i know.

Cheers for replying, would you know if the wiring is also there for retractable wing mirrors?

Sorry missed your reply about the wing mirror first time round

Nodge68 said:

Fog light wiring is there. You'll need the switch and 2 relays for the fuse box. Otherwise it's just the fog lamps themselves and cut the bumper to fit them in. Don't forget you need trim rings to finish the job off

Power fold wiring should also be there as far as i know.

Click to expand...

Sorry to jump in but what relays for the fogs?

I have the binnacle switch and the plug was there, the illumination works but I was planning on fitting my own relay and wiring

Kayos said:

Sorry to jump in but what relays for the fogs?

I have the binnacle switch and the plug was there, the illumination works but I was planning on fitting my own relay and wiring

Click to expand...

There are 2 relay spaces in the fuse box of the fog relays. The wiring should be present iirc. It is definitely present on my 05 SE. All that is missing is the switch, relays and light's themselves.

Nodge68 said:

There are 2 relay spaces in the fuse box of the fog relays. The wiring should be present iirc

Click to expand...

Awesome, I will need to mod it slightly as I have the bull bar spots, but I'd like the "factory" lights on the binnacle switch, even if it isn't technically the correct one