rojbarker
New Member
- Posts
- 544
- Location
- Handover, 'Ampshire
Morning, nearly welded the whole of the boot floor and some bits in the arches but we're going to make a start on the front chassis-body mounts. It looks like this on both sides and the MOT guys didn't like it!
Any idea the best way to weld this? I was thinking about jacking the body off the chassis, dropping the bolts off the mount, and with a bit of steel, weld it on bottom of the body, above the rubber and hammer it round then weld up sides.
But not sure how that'll work once I get the bits and pieces apart - anyone had to fix this bit before?
Any tips or suggestions welcomed!
Any idea the best way to weld this? I was thinking about jacking the body off the chassis, dropping the bolts off the mount, and with a bit of steel, weld it on bottom of the body, above the rubber and hammer it round then weld up sides.
But not sure how that'll work once I get the bits and pieces apart - anyone had to fix this bit before?
Any tips or suggestions welcomed!