Flossie
Well-Known Member
- Posts
- 10,693
- Location
- Shropshire
It is a painful job to get right, I spent days maybe weeks to get mine right but mine was a 5 door on a new chassis with all new doors and tub and bulkhead off another vehicle.
I would strongly suggest your bulkhead needs pulling forward at the top. There are slotted plates and shims in this area to assist.
If you can't face starting over again try slacking off the bulkhead fixings and roof bolts and pushing the bulkhead forward at the top.
You will need a hand with someone nipping up bolts as you push and hold.
I had 4 lorry ratchet straps pulling in all sorts of directions to get it right but the truck was a shell really. That little girl doing the 'steering for daddy' is 17 yrs old now nearly.
I would strongly suggest your bulkhead needs pulling forward at the top. There are slotted plates and shims in this area to assist.
If you can't face starting over again try slacking off the bulkhead fixings and roof bolts and pushing the bulkhead forward at the top.
You will need a hand with someone nipping up bolts as you push and hold.
I had 4 lorry ratchet straps pulling in all sorts of directions to get it right but the truck was a shell really. That little girl doing the 'steering for daddy' is 17 yrs old now nearly.