AMC Head - compatible with 10P?

Hi all - just wondering if anyone knows whether the AMC replacement head for a TD5 is compatible with a TD5 10P?

Sorry if silly question - relatively new to Landy world (indeed any engine work!). Current head is cracked, so need a replacement.

Head I am interested in is on the Turner site:


Thanks a lot!

As the advent says late, I’d assume it’s for the 15p engine. You could ring them to confirm.

They also do a 'cylinder head early' so I assume that might be a better match for the earlier 10p engines. Ask them, they're very knowledgeable about which bits fit which engine.

Be advised that the 'early type' AMC head still uses the 15P rocker cover gasket, if you use the 10P one you'll leak oil all down the back of the head.

Thanks! Will keep an eye on it.

So far so good!

NigeC said:

Thanks! Will keep an eye on it.

So far so good!

Click to expand...

So have you bought one?

I have. A new head and same top set of gaskets as I had fitted previously. Seems to fit ok - but I guess only a good run will tell.

Next job - new steering box to fit and then sort out the oil leak coming from somewhere around the rotary filter.