Alloys

Good morning all
I want to change my tyres and alloys at min they r 195/80 r15 am I right or wrong I can put 205/70 r15 or can I change alloys with 205/70 r16

What are you trying to achieve?

Want put 16" alloys on coz find in It hard around my area to get tyres that am on at min just want know if I can change the alloys to 16"

Yes. You can fit 16", 17" or 18" wheels.
Just remember that if yours has vented front discs, then you need 15" or 16" wheels from a vehicle which is after 2001, as that's when vented discs became standard .

17" and 18" wheels only came in after vented discs, so all of those fit any FL1

Was gonna get 16" alloys

So I could get 205/70 r16 alloys ?

Tazz77 said:

So I could get 205/70 r16 alloys ?

Click to expand...

Yes. Or 215/70/16 or 225/65/16 and you should also get on a 225/70/16, but those get close to the spring cups.

The type of tyres used makes the most difference to usability in all environments.

I've current got 235/55/18 on my TD4 SE.

What is a TD1 ? Is it a TD4 with bad misfire??

My is a td4 04 plate u have help me out b4 with my fl1

andyfreelandy said:

What is a TD1 ? Is it a TD4 with bad misfire??

Click to expand...

oops. Maybe a misfire of the fingers.

I dnt need to get spacer or lift car up it can a straight swop?

Tazz77 said:

I dnt need to get spacer or lift car up it can a straight swop?

Click to expand...

If fitting the sizes I've suggested above, then no spacers or lifts are needed.

I suggest 225/65/16 Yokohama Geolander AT g015. These are good, everywhere I've tried them and don't cost too much either.