Alarm Fault Returns

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JohnnyCrash

JohnnyCrash

New Member
Posts
1,917
So, at weekend I removed the sensors above the passenger seat, split it down, removed the ultrasonic sensors and soldered in new ones. Worked fine instantly, but this morning the fault returned :-(

so locked myself in the car, waited a min and then started to move around and .......




Nothing! :mad::mad::mad: didn't trigger the alarm, so they are not working!? but they are new (6 days) am I really that unlucky? or are there other things to look at??
 
hi, dont mean to sound stupid, but when you replaced them did you make sure..
A. they went in the correct way around ( orientation)
B. the send and receive are the correct way around ( they are marked on the back )
 
chopper007 said:
hi, dont mean to sound stupid, but when you replaced them did you make sure..
A. they went in the correct way around ( orientation)
B. the send and receive are the correct way around ( they are marked on the back )
Click to expand...


Yes and Yes

As said it's worked fine for 6 days after replacing :confused:
 
You got into your car, superlocked it, then tried to set the alarm off?

If the alarm goes off when the vehicle is in superlocked mode is the quickest way to burn your door locks out.
Superlocked mode is the ultimate in security. If it's breached the car is made to burn the locks.
Don't do it!
 
Rick-the-Pick said:
You got into your car, superlocked it, then tried to set the alarm off?

If the alarm goes off when the vehicle is in superlocked mode is the quickest way to burn your door locks out.
Superlocked mode is the ultimate in security. If it's breached the car is made to burn the locks.
Don't do it!
Click to expand...

Wouldn't worry as it isn't working anyway :rolleyes:
 
I've never even checked if my interior sensors work. Can't imagine anyone wanting to steal a P38 so I wouldn't worry about it!
 
stjohnsmythe said:
I've never even checked if my interior sensors work. Can't imagine anyone wanting to steal a P38 so I wouldn't worry about it!
Click to expand...

I'm not worried about theft, It's not something that has ever bothered me with any car I've owned. My theory is that if they want it they will take it! A few years back now near where my folks live a lot of high end cars were stolen but they left just the 4 wheels on your drive??? so you can't stop them no matter what you own :rolleyes:

now what does bother me is beep beep beep "Alarm Fault" every time I put the key in :mad:
 
Last edited:
JohnnyCrash said:
So, at weekend I removed the sensors above the passenger seat, split it down, removed the ultrasonic sensors and soldered in new ones. Worked fine instantly, but this morning the fault returned :-(

so locked myself in the car, waited a min and then started to move around and .......




Nothing! :mad::mad::mad: didn't trigger the alarm, so they are not working!? but they are new (6 days) am I really that unlucky? or are there other things to look at??
Click to expand...
The sensors were the correct part numbers?
 
You must log in or register to reply here.

Similar threads

M
P38 new problem with abs and traction fault
4 5 6
Replies
119
Views
7K
Datatek
Datatek
C
L322 TDV8 MAP Sensors
Replies
4
Views
1K
colinb444
C
feyniriel
P38 alarm and immobilizer problems
2 3
Replies
42
Views
4K
Datatek
Datatek
O
Disco 2 immobiliser/central locking issues
Replies
9
Views
804
Ollie_Mif
O
U
L322 (2003) No Start - CAN Bus/Engine ECU Communication Issue
2
Replies
21
Views
2K
Grrrrrr
Grrrrrr
Back
Top