Air filter insert required.

Hi there

I want to replace the air filter insert currently used on my S3 landy, but
this is proving harder to do than I previously thought.

There is a couple of pictures here:
http://www.gg1bwt.plus.com/weber_carb/index.html

Basically, I need the sponge/mesh insert that fits on the top of the carb.
Its dimensions are:

External diameter: 5 6/16 inches (135mm), internal diameter 3 11/16 inches
(95mm) and height 2 1/16 inches (52mm) - all measurements are approx!

I have tried the local motoring shops, to no avail. If anyone knows of a
supplier of the filter, I would be grateful.

Thanks in advance.

Kevin

--
Kevin Frost
g1bwt _at_ gg1bwt dot plus dot com
Remove spam collector to reply direct

Mr.Nice. wrote:

> Twas Thu, 23 Sep 2004 15:36:02 +0100 when Kevin Frost
> <g1bwt@gg1bwt_spam_trap.plus.com> put finger to keyboard producing:
>
>>
>>I want to replace the air filter insert currently used on my S3 landy, but
>>this is proving harder to do than I previously thought.

>>I have tried the local motoring shops, to no avail. If anyone knows of a
>>supplier of the filter, I would be grateful.
>>
>>Thanks in advance.
>>
>>Kevin
>
> don't K&N produce varous foamy bits like that?
>
>
> Regards.
> Mark.(AKA, Mr.Nice.)

Hi Mark

Thanks for that. Have looked at their website, and they don't seem to.
Decided to try a different track though, will try cleaning the sponge and
use the K&N oil on it.

Kevin