After getting an oil change, I now have to change a wheel bearing

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The Green Beastie

The Green Beastie

Member
Posts
16
Location
Vancouver Island, British Columbia, Canada
While my ‘97 D1 was up, doing the 6-12 tire pull clearly answered the question as to why I get an on-off rumbling from the passenger front tire. Bad wheel bearing. That being said, my vehicle came with wheel offsets. Happily having sold them, the steering is better and not as heavy. Not sure about this but I think the offsets could have put more pressure on the wheel bearings, due to their extra distance outboard.

Anyway I have Timken bearings and grease, a large socket for that thrust nut, washers and seals. My only observation here is that there are no races that came with the bearings. Timken part LM603049-20024. Is this a concern? Thanks.
 
The Green Beastie said:
While my ‘97 D1 was up, doing the 6-12 tire pull clearly answered the question as to why I get an on-off rumbling from the passenger front tire. Bad wheel bearing. That being said, my vehicle came with wheel offsets. Happily having sold them, the steering is better and not as heavy. Not sure about this but I think the offsets could have put more pressure on the wheel bearings, due to their extra distance outboard.

Anyway I have Timken bearings and grease, a large socket for that thrust nut, washers and seals. My only observation here is that there are no races that came with the bearings. Timken part LM603049-20024. Is this a concern? Thanks.
Click to expand...
Do you have a manual?
There should be two races and bearings, either side of the hub.
In my Haynes manual (diesel) there is an exploded diagram in chapter 9.
Do they look like this?
https://cad.timken.com/item/tapered...oller-bearings-single-cones-imperial/lm603049

Maybe should be more like this?
s-l1600.jpg


Can only suggest you check part numbers.:(
 
That's interesting to know. I thought that they (the bearings and races) came as one. I did all 4 wheels on mine but didn't think to check the different part numbers. Another lesson learned.
 
The Green Beastie said:
Anyway I have Timken bearings and grease
Click to expand...

Timken are the only bearings worth fitting IME, nothing else even comes close - weird that you can buy them in halves tho o_O ..

Which grease are you planning to use ? It's my opinion that Castrol Pyroplex Red ( or equivalent ) is way better than the "recommended" LM, and in over 50 years of mucking about with LR's, I've never had a wheel bearing fail... :)
 
I will be using Timken wheel bearing grease. I suspect as to why the bearing failed was the extra lateral forces due to wheel spacers. When I first got the vehicle, the steering was a bit sluggish. Once the spacers were off, a more responsive steering came back. Personally, I think that anything that adds resistance or extra pressure, may not be a good thing.
 
I had a chuckle at your post title. I had a neighbor stop at a petrol station to air up all his tyres, jumped back in his car to drive off but then ended up with a dead battery.
Coincidence? lol
 
You must log in or register to reply here.

Similar threads

The Green Beastie
Wheel spacers and wheel bearings
Replies
2
Views
460
The Green Beastie
The Green Beastie
Neptune1922
Disco 2 At the moment following a new chassis on Feb 1st I now have quiescent problem.
Replies
7
Views
436
Neptune1922
Neptune1922
A
Freelander 2 (LR2) FL 2 Wheel bearing type noise from front
Replies
3
Views
1K
Nodge68
Nodge68
D90 Td5
Defender Td5 Wheel Bearing Issue
Replies
9
Views
2K
Brown
Brown
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
3K
Goc3k
Goc3k
Back
Top