Advice

I have oil coming out from the brake drum (handbrake) I'm guessing its the same problem as what's on my old series (seal) is it the same procedure fixing it as on my series? and is it a bugger to do on the P38? any advice as to how hard/easy it os to do, and any tools i may need to do it? ta mucho, my exaust has blown in a few places so went to ATS for a look to see just how bad it was, middle and near side box needs replacing, I have bodged it up with fillers for the passed 8 years, and it seems its time to replace it, got a quote for £214 seems reasonable to me, for them to fit it, i know i can do it cheaper by getting the parts myself and doing it, but its a mucky dirty job, and for the few ££ extra I think its worth it

I think its gear oil... so its the transfer box oil seal???

ftc4939 (part number)

Anyone know what the felt washer part # is??

no one???

not fur a P38... most likely same as other T boxes. have yu tried PMing James M?


cud be this.... Welcome to DLS - Derbyshire's Number 1 Independant Land Rover Centre

Dopey said:

I think its gear oil... so its the transfer box oil seal???

ftc4939 (part number)

Anyone know what the felt washer part # is??

Click to expand...

t/box should be running on atf not gear oil in a p38,is a simple job should have a rubber seal for shaft/flange which can be reused