Advice please

Fitted new ride height sensors on my disco but have noticed that the drivers side rear (pic 1 ) is a lot higher than pass side rear (pic 2) any suggestions before I rip them out and out springs on
Thanks

did you put them on the right way around?

Have you got a nanocom or hawkeye?

Did you disconnect the battery when fitting the sensors?

Cheers

Why would you fit springs? Fix what's there

What was the reason that the ride height sensors were changed?
As @neilly has asked, was the battery disconnected before the work to replace was started?
Has any attempt been made to recalibrate the rear suspension now that you have the new ride height sensors?

Reason for replace previous owner held last ones on with cable ties,I did disconnect the battery,And today I took them off and refitted them again still same ,@meego It has air bags on it

So, we're back to another of @neilly's questions, do you have access to a Nanocom or Hawkeye?

Nope I don't

Sounds like it needs calibrating.

brian47 said:

So, we're back to another of @neilly's questions, do you have access to a Nanocom or Hawkeye?

Click to expand...

Hi @brian47

As he is not answering my questions.....LOL. ..I must be on his ignore list....

Perhaps you can ask him if he knows anyone who does have one...................

Cheers

davcud said:

Nope I don't

Click to expand...

As far as I know, sadly the only way to alter the settings in the SLABS ECU is with a known compatible diagnostics code reader.
You say that you don't have access to one, but do you know anybody who has one and could come to your aid? Maybe a member here will read this and pop up with some help.
If there's nobody in your locality, then it could mean having to leave a spare arm and a leg at the nearest Land Rover specialist.

I'm going to flash my eyelashes and ask kindly on here if someone has one that can help me out

davcud said:

I'm going to flash my eyelashes and ask kindly on here if someone has one that can help me out

Click to expand...

@darrenm is about 20kms from Bolton. I would suggest that you PM him and ask if he can help you out. Be prepared to cover at least his travel costs of course.

I have sent you a pm