- Posts
- 4,469
- Location
- Rotherham
Saves problems later
Advice on heater matrix
- Thread starter Rubberknees
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 2,427
- Location
- Isle Sheppy
Well we hope it’s one less place to leak we hope
- Posts
- 3,313
- Location
- Near Heathrow.
It’s about 5mm cutting on the heater box & couple of metal or plastic diy strips. There’s various bodge methods on rr.net but best to do dash out & remove heater box. Then fix sticky flaps at same time (I’m sure puns will follow).
- Posts
- 18,970
- Location
- Buckinghamshire, UK. ('95 DT)
It does but it requires a bit of fettling to get it to fit. Getting the new pipes all the way through the bulkhead grommets is a hell of a lot easier with 2 people and some washing up liquid.
- Posts
- 18,970
- Location
- Buckinghamshire, UK. ('95 DT)
Worked great on MrGorsky's. New rubber pipes smelt for a few weeks!
- Posts
- 3,313
- Location
- Near Heathrow.
It's also much easier while the dash is out to fit the Audi core into the heater box.
On mine I put the pipes in place, and then refitted the heater & connected it up. Then I disconnected SRS fuses & relay, so I could run the car and check the heater with the dash top removed. Nice & easy to check the flaps worked correctly, and find any leaks, etc.
- Posts
- 2,092
- Location
- Mull of Kintyre
I need to strip things down again to try and fix blend motors etc so maybe have another look at matrix
- Posts
- 2,427
- Location
- Isle Sheppy
Can you remember what relay and fuses it was for the srs because I’m in process of stripping mine out now
- Posts
- 3,313
- Location
- Near Heathrow.
Depends on the year, but mine was F7 and F23. According to RAVE they both feed the SRS ECU, although F23 also connects to Instrument Cluster..
- Posts
- 2,427
- Location
- Isle Sheppy
Cheers matey will pull them fuses before starting the car
- Posts
- 4,469
- Location
- Rotherham
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
- Posts
- 4,469
- Location
- Rotherham
Why were the pipes rerouted through that aswellThat wasn't the pipes but his gimp suit warming up.
brianp38dse
Well-Known Member
- Posts
- 19,611
- Location
- heathrow
I don’t quite understand it’s lasted 20+yrs , fix as standard and you get another 20+
J
The audi matrix is half the price of the aftermarket p38 ones and no more o rings to leak so for me its worth the extra time.
- Posts
- 4,469
- Location
- Rotherham
Ordered all the bits come to £30 just got my time to add on. But as said no more O rings
The O rings have been done once on the 96 but not on the 2001, now if it’s confirmed it’s the matrix I may change my position, but O rings at pennies
and I would look at a repair on the original matrix (in the summer)Jubilee clips V O rings
.J
