Antlandrover
New Member
- Posts
- 5
- Location
- Alberton
I didn't take them out I've actually stripped a bit of insolation off the back and bridged them there but no luck. My no 28 hasn't got a wire in so I really don't know
Disco 2 ACE pins 28-36
- Thread starter Bignose
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,153
- Location
- Arad/Romania
HI, your problem is that you confused the engine ECU with the ACE ECU so remove that wire ASAP untill you dont hurt the ECM and concentrate on the post where you saw that bypass mod cos obviously your ECU with the red and black plugs is not behind LH fascia/glovebox as in the pic
Antlandrover
New Member
- Posts
- 5
- Location
- Alberton
I did remove it directly after I've tried it thanks for the advice. Where is the ACE ECU location
- Posts
- 41,291
- Location
- East Dorset
sierrafery
Well-Known Member
- Posts
- 17,153
- Location
- Arad/Romania
- Posts
- 41,291
- Location
- East Dorset
.....comes a point at which you want to give up, doesn't it!!!
sierrafery
Well-Known Member
- Posts
- 17,153
- Location
- Arad/Romania
unfortunately yes
Antlandrover
New Member
- Posts
- 5
- Location
- Alberton
I looked at the pic but couldn't find anywhere where it says the location of it. But I found it in another side now I know it's behind the glovebox. Thanks everyone for all the motivationAgain, look at the pics!!!
and reread the thread again, it's all there!!!!
- Posts
- 41,291
- Location
- East Dorset
it was in post # 2 "Location: behind LH side of fascia" underneath the picture.
Antlandrover
New Member
- Posts
- 5
- Location
- Alberton
They couldve just said glovebox then I knewanyway thanks is sorted now.
