freelander1958
Active Member
- Posts
- 617
- Location
- cornwall
freelander 1.8 1999 petrol does any one have diagram and info on abs pump where all pipes go into on top there are 2 discs held down by 2 hex bolts what are these for please any info
abs system
- Thread starter freelander1958
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hoss A
Active Member
- Posts
- 139
- Location
- kingston upon hull
I think there shuttle valve covers ! had one of these blow out on mine ! brake fluid all over the place
freelander1958
Active Member
- Posts
- 617
- Location
- cornwall
i have a small leak on myn i undid the bolts but how do they come off is there a seal under plate ?
hoss A
Active Member
- Posts
- 139
- Location
- kingston upon hull
sounds like you have a blockage somewhere or the seals on the valve are shot ! better off changing the abs block ! couldn't get mine to reseal !!!
freelander1958
Active Member
- Posts
- 617
- Location
- cornwall
can you change block without having to resett abs or is it change block and bleed brakes
hoss A
Active Member
- Posts
- 139
- Location
- kingston upon hull
change the block n bleed ! simples ! didn't have to plug mine into a reader just remember to bleed in the right order ! just two 10mm nuts to undo at the base of the block . the brake pipes and the wiring connections to undo !
freelander1958
Active Member
- Posts
- 617
- Location
- cornwall
thats great thankyou bloody cars ,now all i have to do is find a block
