ABS fault code 2-3

MOT next week and really need to get this sorted. done the blink test and got fault code 2-3 repeatedly. it only shows up on some lists and the 1 ive got says ...

2-3 RIGHT REAR - Solenoid valve (inlet or outlet valve) failure in modulator, wiring harness or inside ECU.

got absolutely no idea what this means and less of an idea how to sort it. i cant delete it because its constantly there, managed to clear all my other codes but this 1 is a mystery.

any advice very much appreciated

cheers, mark

Mark are you sure that your description of the fault code? as on a list I have got it says 2-3 is a Recirculation pump failure , could be a failure of the pump , failure of 35 amp fuse or failure of the relay or broken / damaged wiring. Do a search on the internet there are several sets of codes and definitions . Regards Jonathan

jonathanp said:

Mark are you sure that your description of the fault code? as on a list I have got it says 2-3 is a Recirculation pump failure , could be a failure of the pump , failure of 35 amp fuse or failure of the relay or broken / damaged wiring. Do a search on the internet there are several sets of codes and definitions . Regards Jonathan

Click to expand...

your spot on, the fusable link has blown. managed to find another list of fault codes that seem to fit better. will look at it again tomorrow

thanks