A none Range rover Question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

dougdotcom

Active Member
Posts
605
Location
Langley Mill. Nottingham
COS... on the Renault forum you have to book an appointment to ask a question and fill in seven request forms for an answer so i wanted to know about Spigot Rings for my Renault Scienic 2002, it has wolfrace alloys on and the front wheels wobble at 70 mph onwards, turns out i need Spigot rings as there aren't any fitted or they have gone walkies by last owner. This was noticed when i had 4 new tyres fitted and balanced and the tracking done. it’s so bad it wobbles all my loose bits and the wife's too :D. wanted to know where i measure to be sure i get the right spigot rings. anyone had any dealings with this type of problem please? :)
 
measure the o/d of the hub and the i/d of the hole in the wheel. Take one from the other and that will give you the size you want. Then google it. Prob will send you to ebay or wolfrace. had the same prob on my old Saab 900 when i fitted 17s on it.
 
looks right, but double check measurements as the wheel side of things could be different than the listed item. think my Saab had 2 or 3 different possibale sizes as the wheels came off a Vauxhall but where made for all sorts of cars
 
I second eBay, had the same problem, just needed the vehicle model and wheel make and a set were in the post for next to fack all
 
Get the plastic spigot rings. Metal spigot rings I had gave me soooo much grief. They corroded a bit and pretty much made removing the wheel impossible. Changed them to the plastic type and no more issues.
 
Back
Top