A nice easy one. Towbar question

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

phantom21

New Member
Posts
58
Location
West Susex
98 P38
Can the swan neck be replaced with a standard flange mount towball design. I don't want to replace the whole towbar, just the removable extension. And if the answer is yes, anyone got one for sale or want to do a swap

Karl
 
With the EC tightening up on towbar specifications, only type approved towbars must be supplied and fitted..this means that they can't be modified.
In short...either remove and fit a "Fixed towball" type or stick with the original..otherwise you could get done.
 
Irishrover said:
With the EC tightening up on towbar specifications, only type approved towbars must be supplied and fitted..this means that they can't be modified.
In short...either remove and fit a "Fixed towball" type or stick with the original..otherwise you could get done.
Click to expand...

Only applies to vehicles registered after 1st Aug 1998.
 
Hiya Pikey..that's correct but surely modifying a towbar in any wayis a can of worms. For what they cost, it's far better than seeing your trailer/caravan disappearing from view through the rear view mirror.
I reckon that if an accident was caused and it was due to towbar failure, especially if it was modified, serious questions would be asked irregardless of whether it was a pre or post 1998 car
 
If you want a normal flange on, you'll have to change the crossmember that sits inside the bumper skin. roundabout £150 new.
 
Irishrover said:
Hiya Pikey..that's correct but surely modifying a towbar in any wayis a can of worms. For what they cost, it's far better than seeing your trailer/caravan disappearing from view through the rear view mirror.
I reckon that if an accident was caused and it was due to towbar failure, especially if it was modified, serious questions would be asked irregardless of whether it was a pre or post 1998 car
Click to expand...

Aye couldn't agree more I've got a Dicky Bates drop plate on the 90 with a 3.5tonne ball and pin hitch, on it. But lots of peeps are fitting these southdown detachable tow hitch type jobbies. And I've heard a couple of peeps say there illegal when in reality they aren't. So long as ya vehicle is pre Aug 98.
 
Last edited:
redhand said:
Aye couldn't agree more I've got a Dicky Bates drop plate on the 90 with a 3.5tonne ball and pin hitch, on it. But lots of peeps are fitting these southdown detachable tow hitch type jobbies. And I've heard a couple of peeps say there illegal when in reality they aren't. So long as ya vehicle is pre Aug 98.
Click to expand...

;) ... and which work extremely well. ;)
 

Attachments

  • DSC00098.JPG
    DSC00098.JPG
    118.6 KB · Views: 199
  • DSC00312.JPG
    DSC00312.JPG
    97.5 KB · Views: 226
  • P040609_15.11.jpg
    P040609_15.11.jpg
    214.5 KB · Views: 159
phantom21 said:
I wasn't intending to modify anything, I just wanted to know if Land Rover supplied an alternative to the swan neck.
Click to expand...
Yes a Land Rover multi-height plate but it cost so much money that you'll prefer to change of towhitch.

A pic of mine with a MaxxRaxx Bike Carrier. I don't know the PN code but may do a research on Microcat for you
 
You must log in or register to reply here.

Similar threads

A
One Piece Door Seals
Replies
9
Views
866
dag019
dag019
D
Freelander 1 SOLD!! 2005 Freelander 1 1.8 Petrol for sale
Replies
6
Views
3K
drfoster
D
dag019
A question of gearboxes
Replies
16
Views
1K
Skolmate
Skolmate
T
2,5 NA to 2,25 Petrol
Replies
15
Views
1K
ThomasLRNL
T
xDParis64
IRD Fail???
2
Replies
25
Views
3K
Alibro
Alibro
Back
Top