A frame to Chassis Bracket ?

Hi guys
I am just in the middle of ordering parts for my new chassis swap and a few weeks ago whilst i was looking for other parts for a different job on my 90 on ebay i could see loads of adds for these brackets and now i need them there is none on ebay, any idea's where i can get them from please as mine are really coroded

The Mad Hat Man said:

http://www.yrm-metal-solutions.co.uk/epages/BT4822.sf/en_GB/?ObjectPath=/Shops/BT4822/Products/083A

Click to expand...

I think he means the chassis end (with the three bolt holes).

Kwakerman said:

I think he means the chassis end (with the three bolt holes).

Click to expand...

Thats right

Pt No 575615 and 575616?

Actually not the easiest things to get hold of second hand, and stupid money new

aaronmorris said:

Actually not the easiest things to get hold of second hand, and stupid money new

Click to expand...

Dead right just looked on the paddocks site and they are £230 odd quid a pair so i will get the old ones off and clean them up, just thought they would be easy enough to buy and paint to match the colour of our 90 so once they are off i will do this instead

still - contact YRM - they have always been very helpful and will make yu a set if you supply a pattern/original

cornish rattler said:

Dead right just looked on the paddocks site and they are £230 odd quid a pair so i will get the old ones off and clean them up, just thought they would be easy enough to buy and paint to match the colour of our 90 so once they are off i will do this instead

Click to expand...

Have them shot blasted and they should come up like new
I'd say I've got some in the shed somewhere but you might as well just clean and paint yours.

for that price - look for a scrap chassis....... what about Pikeys old one?

howabout peeps like Richards?

I might have a couple if you need some.

Mine were rough but came up like new after sandblasting.

On new Marsland chassis they are now incorporated into the A-frame crossmember itself I believe. For a Richards chassis you will need the brackets.

I have found they can wear if the bushes are not done tightly enough and the inner sleeve rotates against the inner sides of the bracket, if this happens you may have trouble getting them to tighten up in future as well.

cornish rattler said:

Dead right just looked on the paddocks site and they are £230 odd quid a pair so i will get the old ones off and clean them up, just thought they would be easy enough to buy and paint to match the colour of our 90 so once they are off i will do this instead

Click to expand...

I have just stripped and repaired my 2 door Range Rover all I did with those bracket you are looking for was shot blasted them and painted them look as good as new

Cheer's guys i have removed them now so i will look into getting them shot blasted

aaronmorris said:

Actually not the easiest things to get hold of second hand, and stupid money new

Click to expand...

oh cock! wish i had known just binned a set sunday at the tip
don't need them on my marshlands chassis