Series 2 A, Bulk head part number

So, many years before i purchased my 1968 swb 88 someone fitted a rover v8. some parts of the conversion are good and some not. the bulkhead has been butchered and just made square to accept the gearbox bellhousing. i want to make it look as it should be there. footwells etc i can get but this part has been completely removed. any ideas on suppliers or part numbers. thanks
the pic is from a usa supplier.

The ex army bulkhead I rebuilt for my lasndrover had a detachable interface to couple to the tunnel ie 2 seperate pieces.
Photo of my bare bulkhead attached tried looking for the part in catalogue but not listed.
Maybe ask on here in wanted to see if anyone has a bulkhead they are scrapping to cut the part from.
I must have got lucky because I managed to buy the interface from ebay but 11 years ago.

Blackburn said:

The ex army bulkhead I rebuilt for my lasndrover had a detachable interface to couple to the tunnel ie 2 seperate pieces.
Photo of my bare bulkhead attached tried looking for the part in catalogue but not listed.
Maybe ask on here in wanted to see if anyone has a bulkhead they are scrapping to cut the part from.
I must have got lucky because I managed to buy the interface from ebay but 11 years ago.

Click to expand...

Or make a cardboard template and fab the bits up ...

Piece that couples to floor / tunnel is 330069
Looking more closely at the parts book this might be the part you need to join it to flat face of bulkhead.
https://pablanchard.co.uk/index.php?route=product/search&search=MRC4135
Mentioned on lower part of spares pic.
Pricey but they will advise if correct part.