98 p38 2.5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

returned

Member
Posts
17
hi all , I have a p38 parked up for while that won't select gears .
it was 100% before been parked up.
not sure where to start looking.
 
It hasn't leaked all the oil out of the gearbox has it?? :eek:
Get it running and take the upper level plug out of the gearbox sump. When running it should have next bugger all come out as it should be at optimum level.
Use a cable tie bent on the end and dip it into the sump.
If no joy at all. Top it up while running until the oil runs out of the level plug. ;)
 
Last edited:
It hasn't leaked all the oil out of the gearbox has it?? :eek:
Get it running and take the upper level plug out of the gearbox sump. When running it should have next bugger all come out as it should be at optimum level.
Use a cable tie bent on the end and dip it into the sump.
If no joy at all. Top it up while running until the oil runs out of the level ug. ;)
98 has a dipstick
 
98 has a dipstick
face-palm-emoticon-vector-12786472.jpg oops,
There's the answer to that one :D
Check your dipstick:)
 
Back
Top