Yep,this old chestnut again...lol.
Well ive finally got round to fitting a new air temp.sensor in the rear of the intake manifold by bulkhead.bit of a bugger to get to and get connector off . Yes it is an auto with edc and have done everything else from sedimenter and new lift pump,glowplugs,water temp sensor etc.....
So......connected up...and started first crank !
was still frosty out and usually when it wont start till 3rd time .
So I would recommend doing this if you have starting probs.will see in the morning if it starts so well....fingers crossed !
Well ive finally got round to fitting a new air temp.sensor in the rear of the intake manifold by bulkhead.bit of a bugger to get to and get connector off . Yes it is an auto with edc and have done everything else from sedimenter and new lift pump,glowplugs,water temp sensor etc.....
So......connected up...and started first crank !
was still frosty out and usually when it wont start till 3rd time .So I would recommend doing this if you have starting probs.will see in the morning if it starts so well....fingers crossed !
