nickh75
Well-Known Member
- Posts
- 3,052
- Location
- near derby
brother in law has a problem an has asked me for help from you lot
5000 miles from engine rebuild an now hes got problems with over heating
first there was a slight leak an that was sorted
now it is not losing water but the water is being pushed from the head into the the expansion bottle, an boiling up, no water in thermostat housing,
water pump is ok, new themostat fitted, hoses ok, no air locks, sender is ok,
expantion bottle cap ok, radiator ok, heater plugs look ok ,nice an black,
is the head ****ed or the gasket.
not had it pressure tested yet, but theres no white smoke on acelleration
can any one give me any other ideas on what it could be?
pleeeese
Nick
5000 miles from engine rebuild an now hes got problems with over heating
first there was a slight leak an that was sorted
now it is not losing water but the water is being pushed from the head into the the expansion bottle, an boiling up, no water in thermostat housing,
water pump is ok, new themostat fitted, hoses ok, no air locks, sender is ok,
expantion bottle cap ok, radiator ok, heater plugs look ok ,nice an black,
is the head ****ed or the gasket.
not had it pressure tested yet, but theres no white smoke on acelleration
can any one give me any other ideas on what it could be?
pleeeese
Nick