300tdi engine swap probs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RAZ8550TDI

New Member
Posts
3,573
Location
liverpool
reet.......:eek:
n reg 300tdi blew engine
took engine out,
replacement engine went in out of a runner back on origional n reg 300 loom, wont start.
bled injectors,
has 200 tdi fuel pump, so sensor is now redundant,
has lift pump from the engine i took out on the replacement engine as connectors for fuel lines where the same.
no egr ( been removed)
any clues as to where i have gone wrong??:rolleyes:
 
reet.......:eek:
n reg 300tdi blew engine
took engine out,
replacement engine went in out of a runner back on origional n reg 300 loom, wont start.
bled injectors,
has 200 tdi fuel pump, so sensor is now redundant,
has lift pump from the engine i took out on the replacement engine as connectors for fuel lines where the same.
no egr ( been removed)
any clues as to where i have gone wrong??:rolleyes:

All it needs is fuel, if it's getting fuel to the injectors, properly, then it shud fire. Can you get it to fire up on wd40 down it's face, might just need that to clear all the air out.

Perhaps the engine stop plunger is stuck, or you have a bad connection to the stop. If you unscrew it can you take the plunger out, then refit it without it.

Fuel in and out the right way around?
 
Back
Top