300tdi auto torque converter how to remove

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It looks like I might need a full pump there is a little scoring on the housing where the lugs have been
getting ground up like coffee beans.

I had to down tools yesterday as the old chap next door has taken ill so everything else went out the window.
i can have a look tomorrow see if ive a good second hand one
 
Hi All,

Sorry to resurrect an old thread! This has been very helpful so far, as some doughnut (me) didn't do his research and smashed my oil pump drive gear lugs off.

I've got the old one off, pump seems to be OK scoring-wise but I'm having trouble finding a replacement cog/drive?

Short of buying a secondhand box and pulling one out, where is the best place to buy a new one?

Many thanks

Ollie
 
Hi
One like this https://www.ebay.co.uk/itm/Range-Ro...Gearbox-Oil-Pump-Good-Gems-Thor-/303033057505

it’s says for P38 but it’s for the HP22 box. So not sure if it’s the right size for your TC, I know there are different size ones but shafts and sleeve may all be the same. but worth ringing these guys anyway they have loads of bits rather than the whole box.

Maybe JM will be along to confirm:)

Good luck,

J


Brilliant, as far as im aware, the 4HP22, 4HP24 / 24A share the same pump. Although i am happy to be corrected!

Thanks
 
The 24 is a bigger pump but could still be the same size lugs and TC sleeve the 24 usually houses the biggest TC for the 4.6.
But there are 2 smaller TQs .

So you may need to do some research before getting that 1.

J
 
Back
Top