300 tdi crank pulley bolt removal tool
- Thread starter trigga72
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 11,020
- Location
- North of the Wall
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
- Posts
- 11,020
- Location
- North of the Wall
Scroll down to post #5. Post 5 is a long way down the thread because SaintV8 posted a lot of pictures in his first post which was a how to timing belt change.
trigga72
Well-Known Member
- Posts
- 907
Sorry it's the bracing tool to stop the pulley turning so I can crack the bolt
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
i knew that ,but with that type tool you dont need one, i use them as you cant get an impact gun in with engine sat against the rad, that type tool does the same job,but uses your hammer to crack the bolt
trigga72
Well-Known Member
- Posts
- 907
trigga72
Well-Known Member
- Posts
- 907
Ah , I need to tighten the bugger back up on my own though too
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
it does that too
- Posts
- 11,020
- Location
- North of the Wall
- Posts
- 16,475
As per: ( I know it says 200tdi, but the dims are the same....although the 300tdi pulley isn't as deep!)
- Posts
- 11,020
- Location
- North of the Wall
Hiya mate. Howya doing? Hope you're wellAs per: ( I know it says 200tdi, but the dims are the same....although the 300tdi pulley isn't as deep!)
- Posts
- 16,475
I am well, life is busy with now 2 kids, new job, a house move and a wedding to go through, but we will get there.Hiya mate. Howya doing? Hope you're well
I see you rebuild thread is still going, haven't looked in as much as i would have liked, but I hope ll is well with yourself and the big red beasty.
trigga72
Well-Known Member
- Posts
- 907
- Posts
- 11,020
- Location
- North of the Wall
Wow, it doesn't get any busier than that! All sounds great though! Always good to remember that on your wedding day everyone just wants you to have a great time. They're not expecting a great speech, so long as you look happy, have a smile on your face and thank them all. That's a great speech.
Aye, the engine rebuild has been ongoing due to the mysterious oil burning. Might have it sussed now though!
Great to hear from you
- Posts
- 11,020
- Location
- North of the Wall
Tremendous.Goodness me my man , one will be made at work !
Just thought I'd pop that link on as this fella makes great stuff and sells it at very acceptable prices.
Mowog73
Member
- Posts
- 50
- Location
- SW Ontario Canada
Can someone please explain to me how the hand impact bar that jamesmartin suggests can be used to loosen and tighten the pulley bot. Thanks
tottot
Well-Known Member
- Posts
- 7,459
- Location
- west wales coast
Socket fits on square and placed on bolt with the short bar horizontal. The long bar is held vertical and hammer worked. There are other way's to free crank bolt.
