3 amigos tried everything

Hi guys I'm new to the forum.
I have a discovery 2 spring converted. And it's been great up until now.
I've been reading every post about 3 amigos I can find and still can't get to the bottom of it.
Things I have tried include:
4 new abs sensors.
2 new hubs.
2 shuttle valves.
Shuttle valve mod.
Every time I replace the abs sensor the lights go out for about 2 miles then they re apear and don't go off even after switching the engine off.
I've cleared the fault codes endless times with new sensors and hubs etc but still no luck.
Any advice would be greatly appreciated.
Thanks.

If the new hubs you used do not have 60 tooth exciter rings, the signal received by the abs sensors will be incorrect and trigger 3 amigos.
This is a known problem with some cheaper hubs.

Thanks for that advise mate I'm not 100% sure if it is or not I'll have to have a look thanks for that mate

Welcome to the forum

Welcome to the forum,

Have you plugged it into diagnostics?

Cheers

Thanks guys and yee have had it pluged in tells me front left abs sensor electrical fault