3.9 lpg gas nozzle help...
- Thread starter mr-wiggly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wil2813
Well-Known Member
- Posts
- 2,324
Its the one with 2 pins on it
khaos
New Member
- Posts
- 2,907
- Location
- Sheffield, South Yorkshire.
In the glove box! Surely they can't be anything to do with the gas, that's down right dangerous.
mr-wiggly
New Member
- Posts
- 44
ive got two brass nozzle connectors with two pins on each slightly different?
Khryztal
New Member
- Posts
- 725
- Location
- Felcourt. Surrey
Land Rover Zone - Khryztal's Album: A minor rebuild - Picture
Land Rover Zone - Khryztal's Album: A minor rebuild - Picture
Links to my album. Top ones is on white RRC bottom one is on brown rrc
Both are standard UK fillers
Land Rover Zone - Khryztal's Album: A minor rebuild - Picture
Links to my album. Top ones is on white RRC bottom one is on brown rrc
Both are standard UK fillers
mr-wiggly
New Member
- Posts
- 44
have sorted the correct nozzle/adapter out from a local lpg garage for £20, filled up for the first time with gas, its now leaking from the fill up point on the car, could this be because the gas system has not been used for some time? the lpg garage wants £100 just to look at it.....GULP.
the adapters are normally for abroad...you do not require an adapter normally in uk
That depends on how old and the type of kit. My jag had an adaptor on it.
My disco dosnt.
bobbler
New Member
- Posts
- 2,773
- Location
- County Durham
had an old works ****roen that was the same came with factory fitted lpg but needed an adaptor to use on uk pumps.
Grimmer
THE Winner
- Posts
- 13,678
the adapters are normally for abroad...you do not require an adapter normally in uk
My father-in-law has got a Crysler something or another and I know he has this little brass adaptor he has to screw in before filling up,
