2a parts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Pers

New Member
Posts
9
Location
Essex
Anyone breaking 2a Essex area.
Need;
Throttle linkage
Fuse holder
Headlight relay
N/S bulkhead/chassis plate
Tailgate
Smiths heater matrix
Derrick
 
Last edited by a moderator:
Anyone breaking 2a Essex area.
Need;
Throttle linkage
Fuse holder
Headlight relay
N/S bulkhead/chassis plate
Tailgate
Smiths heater matrix
Derrick

I think people will need more info
Linkage petrol or derv?
Fuse single or twin?
Wot you mean by headlight relay?
Which chassis/bulkhead plate specifically?
How good has the tailgate got to be?
Which type of smiths heater?
 
AH! Good morning Iynall. 1971 2a, 88”petrol. List as follows; 2 fuse holder. Relay, ally dome with 5spade terminals, fits next to fuse holder, see photo. Chassis plate n/s attaches to bulk head and throttle linkage is connected to it prior to carb. All throttle linkage and spring to pedal shaft. The bracing bar from bulk head to can’t remember. The tail gate (sound for sand blasting), with fittings and latches if possible. 1D44A9C6-7BB9-4802-AAA3-FFE09C672FC5.jpeg 17CC7A4A-CB72-4147-B808-B9CE029F1058.jpeg. Bonnet hinges as photo. 1D44A9C6-7BB9-4802-AAA3-FFE09C672FC5.jpeg. Not sure what else is missing at the moment, early days!!
I am Derrick (wife calls me Pers)
 

Attachments

  • 1F87FCF5-3AB5-4482-9DC6-F67B9881B2B9.jpeg
    1F87FCF5-3AB5-4482-9DC6-F67B9881B2B9.jpeg
    254.4 KB · Views: 83
Back
Top