200tdi won't start, Holmes Chapel Cheshire.

rgabbitas · Mar 17, 2015

fitting 200tdi into series 3, trying to start engine before rebuilding rest of car.
Rebuilt injectors, new lift pump, new battery, timed, fuel bled. Will not fire but will fire on easy start but dies when easy start removed.
Anyone near to Holmes Chapel, junction 18 M6 HELP!!

markSX · Mar 17, 2015

Have you cracked the injectors, are you getting fuel to them ?

GRATCH · Mar 17, 2015

Is the stop solenoid working? Sounds like no fuel getting through.

Just re-read, series three has manual engine stop, 200tdi has an electrical engine stop. You will need to take a feed from an ignition live to the solenoid on the fuel injector pump.

rgabbitas · Mar 17, 2015

Yes plenty of fuel and pulsing in right order

rgabbitas · Mar 17, 2015

Got fuel to injectors but will not fire

rgabbitas · Mar 17, 2015

Have fitted a push switch to open solanoid to allow fuel through

markSX · Mar 17, 2015

Recheck the timing, especially the injection pump timing, if it's not almost spot on it wont start.

blue beasty · Mar 17, 2015

Please stop posting the same question all over the forum, you'll miss half the answers and I'll get bored and delete the lot :suspicious:

200tdi won't start, Holmes Chapel Cheshire.

rgabbitas

Member

markSX

Active Member

GRATCH

HUGE MEMBER

rgabbitas

Member

rgabbitas

Member

rgabbitas

Member

markSX

Active Member

blue beasty

Leaks an prone to bits dropping off

Similar threads