1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

200TDI - Diff Pinion 2 or 4 ??? HRC 1124

Discussion in 'Defender 90 / 110 / 130' started by AH-4x4, Dec 13, 2020.

< Previous Thread | Next Thread >
  1. AH-4x4

    AH-4x4 Member

    Joined:
    Aug 3, 2017
    Posts:
    85
    Likes Received:
    9
    Location:
    Braintree
    Hi,
    From the stamp on the outside of the Diff ( HRC 1124 ) & ( A-15L-F ) can you tell from this if its a 2 or 4 pinion Diff ??
     
  2. marjon

    marjon Well-Known Member Full Member

    Joined:
    Jul 15, 2018
    Posts:
    9,848
    Likes Received:
    20,496
    Location:
    Bulgaria
    I don’t believe you can.
    I didn’t think they fitted any 4 pin diffs to defenders as standard. I can only say they fitted it to the 4.6 RR rear diff standard.

    Why would you like to know?

    I think @jamesmartin might know.

    J
     
  3. Knappster

    Knappster Well-Known Member Full Member

    Joined:
    Nov 3, 2018
    Posts:
    2,251
    Likes Received:
    1,136
    Location:
    Stroud
    Didn’t LR fit 4-pin diffs to factory V8 90’s?
     
    marjon likes this.
  4. marjon

    marjon Well-Known Member Full Member

    Joined:
    Jul 15, 2018
    Posts:
    9,848
    Likes Received:
    20,496
    Location:
    Bulgaria
    Maybe, my bad:( but would only be in rear.

    J
     
  5. jamesmartin

    jamesmartin Well-Known Member

    Joined:
    Dec 8, 2010
    Posts:
    91,883
    Likes Received:
    20,292
    Location:
    louth lincs
    yes v8 90s and some sv,hrc casting number wouldnt help identify which
     
    marjon likes this.
  6. AH-4x4

    AH-4x4 Member

    Joined:
    Aug 3, 2017
    Posts:
    85
    Likes Received:
    9
    Location:
    Braintree
    Thanks for the info so far... i need to replace both axle drive halfs as the last owner welded the end to the drive flange. Paddock own seem to sell these for the 2 pinion's, so fingers crossed its correct :)
     
    marjon likes this.
  7. marjon

    marjon Well-Known Member Full Member

    Joined:
    Jul 15, 2018
    Posts:
    9,848
    Likes Received:
    20,496
    Location:
    Bulgaria
    Didn’t know the the half shafts made a difference;) the diff has its own spec and if you have ordered for your year it should be ok, I think it’s the splines on the end that changed.
    Quick enough to pull 1 and check, before you spend money.
    I have fixed 1s (I think). Never broke 1 or had any reason to pull 1, yet;).

    good luck:)

    J
     
< Previous Thread | Next Thread >