200tdi alternator move

Hi everyone,
I've been looking for a way of moving the alternator on my 110 to the other side of my engine so it will be above the injection pump. It is a discovery 200tdi engine and the reason I want to move it is that the current set up is very tight with the intercooler pipe, pas pipes and brake pipe. If I can move the alternator to the other side of the engine that would solve all on my problems and make it a much better set up.
Does anyone know of a bracket that will allow me to mount it and use the existing belt set up just with a longer v belt?

Thanks

Just found this
https://www.landyzone.co.uk/land-rover/moving-alternator-200-disco.260283/
Any thoughts?

Its still working just fine
I think glynn lewis does a proper pukka kit that does the same but looks much nicer.

Much neater than mine and not to badly priced

http://www.gwynlewis4x4.co.uk/product/200tdi-discovery-twin-alternator-mount/

Yeah I did see that kit thanks. Only problem is that I don't have a double v crankshaft pulley or an air con idler and tensioner. By the time I add them to the price of the kit it is going to be £200+

Would longer belts (+1") allow you to lift it a bit out of the way? Cheap solution.

I made a mount for mine and added a pulley to the water pump. Probably not good for the water pump bearing but that gets replaced every. 2-3years as standard so hey ho

Thanks for the feedback. After a bit of head scratching I have come up with a slightly different set up to anything else I have seen. I am using the same pulley from the power steering pump and I have made a bracket to mount the alternator on top of the timing case where the air con pump could be. Belt will be here tomorrow but it all looks to be just perfect at the moment. Might just make a small wrap around shield for the bypass hose but we will see what it's like with the belt

Happy days well done

Thats pretty nifty.

I will put some more pictures up later once I have the belt fitted. Took me hours to get just the right height and positioning but I think it's just right now. Well worth doing for anyone running a 200tdi conversion

Where can I find some steel tube to weld onto a plate? I made mine with box section before but wouldn't mind doing a better job

ebay - wot diameter?

The finished product. Belt runs well clear of the bypass hose and the water pump so should be good by the look of it

The Mad Hat Man said:

ebay - wot diameter?

Click to expand...

I was thinking 10mm I'd with the thickest wall I can find

The Mad Hat Man said:

http://www.ebay.co.uk/itm/STEEL-PRE...138789?hash=item3ac1b79ba5:g:j1kAAOSw37tWAyig

Click to expand...

Awesome. Just looked on that link you posted and saw some 15mm by 2.4wall so brought a length of that, I'll wait until it comes and mess about with a cheap alternator I won on eBay