2008 Vogue wheels

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

C8EFF

Member
Posts
21
Location
Stoke-on-Trent
Hi All, I've owned my Vogue for three weeks and have only just noticed that I have different wheels on each side! All wheels are Autobiography style but nearside are dished or offset, while offside are more flat in design.
All wheel/tyre sizes are the same. My question is should the offset wheels be on the rear axle and the flatter wheels go to the front or should these have not been mixed in the first place. Thanks for any help on this.
 
question is should the offset wheels be on the rear axle and the flatter wheels go to the front or should these have not been mixed in the first place. Thanks for any help on this.

This is a new one to me but I admit it gave me the best laugh I'm likely to get this week - sorry :oops:
For what it's worth I'd say the latter scenario.
 
I would assume that both axles are the same length therefore the offset on all 4 wheels should be the same. If the axles were different widths then all range rovers would have different wheels front and back (or so I would have thought)
I'm fairly sure the autobiography wouldn't have a different axle configuration.

Does it state the offset of the wheels in RAVE?? Not at my laptop so can't check.
 
OK, Managed to open RAVE From dropbox on my phone.
Front track 1540mm rear track, 1530mm so only 10mm difference between the two.
How much is the offset difference on the wheels?
 
Hi All, I've owned my Vogue for three weeks and have only just noticed that I have different wheels on each side! All wheels are Autobiography style but nearside are dished or offset, while offside are more flat in design.
All wheel/tyre sizes are the same. My question is should the offset wheels be on the rear axle and the flatter wheels go to the front or should these have not been mixed in the first place. Thanks for any help on this.

That sounds very odd.

Sure the former owner didn't curb two of the wheels and replaced them by cheap copies bought on eBay/
 
IMG_0028.JPG
IMG_0029.JPG
 
Do the different wheels actually have a different offset, or is it just a different dezine? (overuse of the word different!! )
 
I didn't mean less wheel bolts per say, just less stick out.
As someone touched upon, aftermarket V genuine.

As I'd mutter to myself if Julian Clary bumped into me, Bummer.
 
I take it that the offset is different by the look of the wheel, unsure of how to check.
If you've currently got one of each wheel on the same side, have a look from the front or back of the car along the side and see if one wheel sticks further than the other.
 
OK, the concave wheel is about 1" proud of the flatter wheel, also supported by the pictures above - the concave wheel clears the front caliper by 1"+ while the flatter wheel runs about 1/4" away from the caliper.
 
Back
Top