Hi there, I am new to the Landrover scene, love the vehicle and always wanted one. I recently purchased one with some work to be done on her. The most prominent issue I would like to address is the shuddering. I have searched through many forums and youtube clips but can find no conclusive answers.
Details:
2008 Freelander 2 HSE auto (Diesel)
Symptoms: When cold - No problem at all
At opearting temp: from second to 3rd and 3rd to fourth, just before gear change and when accelerating (around the 1800RPM mark, there is a shudder. I can feel it on the steering wheel and through the car. Similar to a feeling when engine mounts are shot. I can drive through it, and is then smooth as silk. The event is more prominent on an incline. If RPM is below 1800 on a flat road, not prominent at all (Might be there, just not feeling it )
Done thus far:
* Transfer box (This was serviced - Trans oil changed)
* Mounts
* Propshaft or universal (Removed the prop shaft and tested for a few km's with no change)
Its flippen annoying not knowing what it is, any guidance?
Details:
2008 Freelander 2 HSE auto (Diesel)
Symptoms: When cold - No problem at all
At opearting temp: from second to 3rd and 3rd to fourth, just before gear change and when accelerating (around the 1800RPM mark, there is a shudder. I can feel it on the steering wheel and through the car. Similar to a feeling when engine mounts are shot. I can drive through it, and is then smooth as silk. The event is more prominent on an incline. If RPM is below 1800 on a flat road, not prominent at all (Might be there, just not feeling it )
Done thus far:
* Transfer box (This was serviced - Trans oil changed)
* Mounts
* Propshaft or universal (Removed the prop shaft and tested for a few km's with no change)
Its flippen annoying not knowing what it is, any guidance?