L322 2005 vogue auto

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
O

omlette

Member
Posts
49
Location
aberdeen
hi very very poor heater on the beastie,can i bypass the heater valve in the engine bay?if so does all 3 pipes need to be joined ,or just 2 of them? if so which ones to see if its faulty,any help would be great.
 
Mark Piercy said:
It could be the blend motors inside the dashboard heater assembly. L322 heads needed here!!
Click to expand...
Well diag would point to blend motors if it's that.

I'd much rather fix the problem than muck about doing something which may not improve the situation.

I may be wrong but I think this was covered recently, some bypass valve behind the glove compartment or accessible via.
 
9340a05ba2ec22011abcbd5666c16686.gif
 
omlette said:
thanks for the replies guys
Click to expand...
Maybe not that simple, what engine and does it get up to temp ( gauge more or less straight up) two valves are for heat each side and third is to do with fuel burning heater (kind of) somebody on here (well I think it was on here) not long ago had problems with third valve not letting water flow where it should you might find it if you do a search if its working that is (forum keeps going out on strike hamster not getting fed enough I think).
 
You must log in or register to reply here.

Similar threads

B
2005 freelander FBH
Replies
5
Views
316
Nodge68
Nodge68
R
Heater low temperature, lack of power, connected?
Replies
6
Views
377
Russell Marlow
R
M
Sport ACE bypass for RR Sport 4.2 Petrol SC
Replies
10
Views
1K
mikesavva
M
S
L322 L322 (2005) bizarre headlight issue !
Replies
0
Views
474
Simsy1965
S
Bobbyjust
L322 Auto TDV8 4.4 Webasto fault
Replies
2
Views
758
Bobbyjust
Bobbyjust
Back
Top