hi everyone,
ran into a little problem the other day with my Range.
all three brake lights stopped working, while all other lights work well.
we checked:
* the fuses - good
* brake light bulbs - good
* changed the brake light switch - good
* over looked the wiring for broken wires or corrotion - one wire broken in the loom behind the battery ( fixed)
* checked if the LCM was getting signal from the brake lights switch - good
*checked if the LCM was sending the signal to the brake lights at the back -NOT GOOD/NOT FIXED... (opened LCM ,cleaned signs of corrotion and 're welded in places)
I'm guessing that the LCM has gotten wet at some point and stopped functioning correctly.
does anyone know where to send the LCM to be fixed or how to fix it.
and what would be the next step from here.
I appreciate any input on this and help.
with thanks in advance
p.s.
battery charges 14,1 - 14,4 v. and I have the 3 amigos celebrating early Christmas on my dash
ran into a little problem the other day with my Range.
all three brake lights stopped working, while all other lights work well.
we checked:
* the fuses - good
* brake light bulbs - good
* changed the brake light switch - good
* over looked the wiring for broken wires or corrotion - one wire broken in the loom behind the battery ( fixed)
* checked if the LCM was getting signal from the brake lights switch - good
*checked if the LCM was sending the signal to the brake lights at the back -NOT GOOD/NOT FIXED... (opened LCM ,cleaned signs of corrotion and 're welded in places)
I'm guessing that the LCM has gotten wet at some point and stopped functioning correctly.
does anyone know where to send the LCM to be fixed or how to fix it.
and what would be the next step from here.
I appreciate any input on this and help.
with thanks in advance
p.s.
battery charges 14,1 - 14,4 v. and I have the 3 amigos celebrating early Christmas on my dash
