Freelander 1 2004 TD4 - HPFP seals

Hi,
Can anybody tell me the part no. for the repair kit for the CP1 high pressure fuel pump? I have had a search on here but can't find it.
Also, does the kit include a new seal for the access plug for the special tool? I assume this should be changed?
The regulator seal kit that I have, only incudes 2 very small o rings and the large gasket that goes between the mating surfaces. There is no larger o ring which I have seen in other videos/posts. Is that correct? It's a genuine Bosch kit.
Thanks in advance

I'll take that as a no.

HP fuel pump issues have been covered dozens of times. I normally resort to the search box, which normally brings up loads of threads related to the question you're after.

The pump rebuilt kit and the regulator repair kit are 2 different kits, I only know the regulator kit is available from Bosch, the pump repair kit is available from other suppliers on the likes of ebay.

The sprocket access plug is part of the engine, not the pump, so it's not in any pump kit I'm aware of. However I don't remember it having a seal anyway, it's just a plug that doesn't leak when nipped up.

Thanks Nodge. I did try the search box but couldn't find part numbers, but I think I've found what I need. It's not easy tracking down parts here in Spain so I've sourced them in the UK.