RS2000CUSTOM
Active Member
- Posts
- 346
- Location
- The Black Country - The Miglunds
What an easy job that was !
Remove viscous fan and rad cowling
De-gas system if any gas left in by means of air con specialist
Undo 2 x AC pipes from AC rad
Remove 1 torx screw from below the the 2 AC pipes
Remove 2 plastic "bolts" from slam panel that support the rad assembly
pull rad assembly towards engine and remove the 2 x plastic corner section from corner of rad assembly
Slide out AC rad
Fit new AC rad and refit all the above
Re-gas AC
I got the AC condensor/rad off The Bay of E for £55 delivered (UK)
Remove viscous fan and rad cowling
De-gas system if any gas left in by means of air con specialist
Undo 2 x AC pipes from AC rad
Remove 1 torx screw from below the the 2 AC pipes
Remove 2 plastic "bolts" from slam panel that support the rad assembly
pull rad assembly towards engine and remove the 2 x plastic corner section from corner of rad assembly
Slide out AC rad
Fit new AC rad and refit all the above
Re-gas AC
I got the AC condensor/rad off The Bay of E for £55 delivered (UK)
