2002 1.8 Manual gearbox drain/filler sealing washers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tonyblack

tonyblack

Member
Posts
29
I'd like to do a gearbox oil change on my 2002 1.8 3dr manual hippo but for the life of me I can't find part numbers for sealing/crush washers for the drain and filler plugs. Does anyone have these to hand?
 
You won't need them. The box casing is made of alloy, so is it's own sealing washer. Just make sure the box and plug are clean before nipping the plugs up again. ;)
 
OK, it's just that the service manual states that new sealing washers should be fitted...

Capture.JPG
 
I've never fitted or known anyone else fit new washers to the Freelander PG1 box. The plugs seal just fine with the existing washer.

Are you doing the IRD oil too? If so get some new plugs, as removing the old ones generally destroys them.
 
Last edited:
You must log in or register to reply here.

Similar threads

I
L322 Could anyone help with 2005 RR HSE fluids questions?
Replies
0
Views
153
invisible999
I
F
R380 drain and fill plug torque?
Replies
8
Views
2K
Scooby22
Scooby22
R
Freelander 1 TD4 IRD Smash, savage FW drive train leaks and mystery washer!
2 3
Replies
40
Views
3K
Jayridium
J
Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
3K
Goc3k
Goc3k
L
R380 MANUAL GEARBOX - WATER IN OIL - IS THERE A BREATHER??
Replies
9
Views
1K
lrjohn
L
Back
Top