Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
Where to begin , while driving it 9 times out of 10 it won't rev past 3000 rpm it's like hitting a wall any ideas , all I have found is solutions to do with the td4 engine but not the Di ?
2000 Freelander 1 Di
- Thread starter Freelander1-20di
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
Today I took the Freelander out , worked perfect untill it warmed up , hit 3000 rpm but I kept my foot down today and it eventually pushed passed it
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
I will have a check over today and see if o can find anything
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
Changed a couple of weeks ago but no difference
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
I've ordered a decat pipe as soon as it's fitted I will see if it's fixed 
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
At a stand still it will rev past 3000 , this morning while driving it was fine while cold but after a while it began to choke n jump like a kangaroo ... This time I kept my foot down and power threw , no smoke
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
Where would I be looking for that ?
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
Still waiting on the decat pipe
Today I took it for a drive , while still cold it had no problems at it went past 3000 rpm no problem
However after 5/10 minutes when it had warmed up it was the same , jirking around as soon as it hit 3000 rpm
Also just to help I have done the edge blank mod , I'm just wondering if I have done it right tho ?
Today I took it for a drive , while still cold it had no problems at it went past 3000 rpm no problem
However after 5/10 minutes when it had warmed up it was the same , jirking around as soon as it hit 3000 rpm
Also just to help I have done the edge blank mod , I'm just wondering if I have done it right tho ?
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
Also prior to this I had a fuel leak , one of the return pipes had split , replaced it and the leak had stopped
Freelander1-20di
Member
- Posts
- 12
- Location
- Bury St Edmonds
There is no vent on my cap
Similar threads
