200 TDI SNORKEL & AIR INTAKE

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Teflonman

New Member
Posts
1
Location
Wales
Tried to connect the fittings within the wing which had come apart leading to the air intake pipe which had come apart. To press these three components together I found impossible. So to fit the snorkel I removed the two fittings from the wing, purchased a replacement air pipe one meter long 66m thick, off the net. Secured the pipe to the snorkel with plastic padding and fed the pipe through. A simple solution to a problem.
 
Tried to connect the fittings within the wing which had come apart leading to the air intake pipe which had come apart. To press these three components together I found impossible. So to fit the snorkel I removed the two fittings from the wing, purchased a replacement air pipe one meter long 66m thick, off the net. Secured the pipe to the snorkel with plastic padding and fed the pipe through. A simple solution to a problem.

Wrong section you won’t get any reply’s in ear try in the right section I would point you the right way but dunno what car it is
 
image.jpg

And no, not a Death Star
 
Welcome to the forum
wave.gif


Fanks fer the tip @Teflonman. Wot the others above is trying ter tell yer is this ere section is fer introductions only. Technical stuff un tips are normally posted int technical sections. There be a list of different sections available on the forum int link below:

https://www.landyzone.co.uk/forum/
 
Back
Top