200 tdi disco brake prob

rubah · Aug 23, 2009

i have just fitted new seals/pistons in the calipers on my H reg discovery. when i bled the system i got a good pedal until the engine is running, then the pedal sinks to the floor.anyone had this happen i would be glad of your help. Rubah.

discool · Aug 23, 2009

You have now got a leak, either at a caliper or master cylinder/servo only because of the higher pressure that was placed on the brake system with the engine running and the servo in operation.

hughesy · Aug 23, 2009

Check for leaks but it's likely that the system still has some air in it.

rubah · Aug 23, 2009

discool said:
You have now got a leak, either at a caliper or master cylinder/servo only because of the higher pressure that was placed on the brake system with the engine running and the servo in operation.

thanks for that i will check for leaks.

discool · Aug 23, 2009

rubah said:
thanks for that i will check for leaks.

Hopefully, you will only have one

200 tdi disco brake prob

rubah

New Member

discool

Well-Known Member

hughesy

Well-Known Member

rubah

New Member

discool

Well-Known Member

Similar threads